- #Do i need raspberry pi codecs install
- #Do i need raspberry pi codecs update
- #Do i need raspberry pi codecs download
- #Do i need raspberry pi codecs free
I have some formatting I really want to do (headings et al), but this should be a decent start. I removed the traffic for the weekend, but this is the dashboard. Best of luck!ĮDIT Here is the link for the current version of the dashboard. My only real outlay was a monitor mount and a new monitor. And 4ish hours stumbling around to get the dashboard set up. This project probably took me 1h to set up the pi.
#Do i need raspberry pi codecs free
Their service is free if you have 1 widget with įINAL Comments. News - I used Feed Grabbr for my news feed. I just searched for something that I liked that is 1920 x 1080. īackground.png - I used this as my background. Since I am only interacting via ssh, it was easier than writing a script to hit f5 or leaving the page completely static. white) and to have the webpage "auto-refresh". I only added a few elements in the html heading to add a background image (vs. I found it easier to align and space things this way since I was combining so many different elements. I built it as a main page (Dashboard.html) with the page elements being pulled through via iframes.
There are a lot of ways to do this, and I'd even encourage borrowing from the magic mirror project. I included a calendar, news widget, stock ticker, to do list, traffic, and weather. This is entirely your choice to what you want to display (and how). It's your call on what you want to name the file, but make sure you point it to the right one. IMPORTANT: I pointed Chromium to load a file that I called Dashboard.html. sudo mkdir /home/pi/html/įinally create a new desktop file to tell the Pi to automatically load Chromium upon boot: sudo nano ~/.config/autostart/sktopĮxec=/usr/bin/chromium-browser -noerrdialogs -disable-session-crashed-bubble -disable-infobars -kiosk file:///home/pi/html/Dashboard.html I have mine turn on at 6am, off at 8:30am, on at 5pm, and off at 11pm during the weekdays.Ĭreate a folder in your home pi directory for the html files for your dashboard. Modify the /etc/cron.d/raspi-monitor-scheduler to your preferences. He has the path to where the files are to be saved at the top of each file.
OPTIONAL: I decided to have my Pi turn on/off the hdmi on a regular schedule (I don't need the dashboard during the night hours). Head to /etc/xdg/lxsession/LXDE-pi/autostart and you'll want to comment out (add a #) to the line that says -no-splashĪnd you'll want to add these lines to the bottom of the file s s -i 's/"exited_cleanly": false/"exited_cleanly": true/' ~/.config/chromium-browser/Default/Preferences
#Do i need raspberry pi codecs install
You will need a program called unclutter to remove the mouse cursor during the display sudo apt-get install unclutterĪt this point, you will want to disable the screen saver. Sudo dpkg -i chromium-codecs-ffmpeg-extra_.82-0ubuntu0.15._b
#Do i need raspberry pi codecs download
To download chromium, enter the following commands: wget I decided to use chromium to display the webpage, but it is up to you which browser you want to use (IceWeasel, Midori, etc.).
#Do i need raspberry pi codecs update
Run the usual update process of: sudo apt-get upgrade & sudo-apt get update The commands for this is: sudo apt-get purge wolfram-engine I wasn't going to use either for this pi, and found that it would free up about 1GB. OPTIONAL: I personally removed wolfram alpha and libreoffice. Once the device booted up, I began setting everything via putty. A good set of instructions are here: iface eth0 inet static To something like the below (with the data filled out). In ther interfaces file, you'll need to modify the line that says: iface eth0 inet dhcp You can either set a dhcp reservation on the router or modify the /etc/network/interfaces file on the Pi itself. STRONGLY ENCOURAGED: It's probably best to set a static IP address for the Pi. OPTIONAL: I found for the monitor I used, I had to enable overscan in order for the image to fill the screen. However, most places recommend you change the account/password from default for security reasons. I left the account as pi for mine since this will only be a local device with no outside access. You'll need to 1) expand the file system, 2) enable SSH, 3) auto boot to desktop and 4) change the internationalisation options. Once in Raspi-config there are a few steps. Once you boot up your Pi, go to raspi-config. Step 1: Instructions to Set Up the Raspberry Pi Itself:ĭownload the latest version of raspberry pi from and flash the microSD card with your program of choice (I use win32diskimager). Monitor Mount (I used this one from Monoprice) HDMI cable (I used this one from Monoprice) Micro SD Card (I just used a spare 8GB card) Raspberry Pi (I used a spare Pi 2 that I just took from an old baby monitor) I had a few requests of my home dashboard, and wanted to share with everyone how I put it together.
0 kommentar(er)
